Chimney Framing Repair

On a factory-built or sided chimney, the masonry you see is wrapped around a wood chase — a framed box of studs, sheathing, and a structural cap that carries the flue and ties the whole assembly to the house. When that framing is sound, the chimney stands plumb and stays attached. When water finds its way in, the wood rots from the inside out, and the chase loses the strength that holds everything in place. Texas Service Experts repairs that framing as a structural job, not a cosmetic one — because a chase that's pulling away from the home is a safety problem long before it's an appearance problem.

Rot is almost always a symptom, so we deal with the cause and the damage in the same visit. Water is getting in somewhere — failed flashing, a cracked chase cover, a leaking cap, or open trim joints — and swapping rotted studs without closing that path just buys a few seasons before it all comes back. We probe the framing to map how far the rot has traveled, pin down the entry point, and stabilize the structure before any compromised member comes out. Then we cut back to sound wood and rebuild with treated, code-compliant lumber sized to carry the load it's meant to carry.

Because the chase is part of the building envelope, the repair isn't done when the framing is back. We re-integrate the flashing, sheathing, and weather barrier so the wall sheds water the way it should, then handle the siding, trim, and cap so the chimney comes out weather-tight and looks like it was never opened up. One crew owns the structure, the leak, and the finish — so you're not chasing a framer, a roofer, and a chimney company to close out a single problem.

The approach is always the same: find the water, prove the extent, rebuild to code, and weatherproof so the rot can't come back. The advantage of calling a whole-home crew for this is right there in the third paragraph — the framer, the roofer, and the chimney work are one team, so nobody's pointing at the other trade when a structural repair touches all three. We document the condition before and after with photos, so you have a clear record of what failed, what we replaced, and why the chimney is once again solidly tied to your home.