Mendota Outdoor DXV35 Outdoor Specs Overview

The Mendota Outdoor DXV35 Outdoor is a premium outdoor gas fireplace fireplace designed for exterior covered patio installations. Heat output is rated at approximately 35,000 BTU/hr, which places it among the higher-output units in its class — appropriate for great rooms, large living rooms, and primary gathering spaces.

Key spec dimensions our installers verify before quoting:

• **Fuel type:** Natural gas or propane (configurable at install)
• **Vent system:** Direct-vent coaxial through exterior wall or roof
• **Glass / viewing area:** standard arched or rectangular ceramic glass
• **Blower / fan:** optional thermostatically-controlled blower kit
• **Control type:** millivolt + wall switch standard, IPI / remote / smart-home upgrade paths available
• **Framing requirements:** confirmed against the manufacturer’s installation manual for your specific serial revision — clearances vary by year

We always verify the unit’s published spec sheet against the actual room we’re working in. A DXV35 Outdoor that fits perfectly on paper still has to clear floor joists, ceiling plates, gas-line runs, and any structural members the homeowner hasn’t seen. That’s why our quote process starts with a site visit, not a phone call.

Who the DXV35 Outdoor Is For

The Mendota Outdoor DXV35 Outdoor fits a specific kind of homeowner. You want a true architectural showpiece — the fireplace is going to be a featured design element of the room, not just a heat source. Premium-tier brand, premium-tier price, premium-tier visual impact.

Specifically, the DXV35 Outdoor is the right call when:

• Your project is a custom build or major remodel where the fireplace is a designed feature
• Your designer or architect specifically called out a brand in this premium tier
• You expect your fireplace to outlast multiple owners and hold its character
• The room layout supports the DXV35 Outdoor’s standard footprint

The DXV35 Outdoor is *not* the right call when you’re chasing the absolute lowest install price, when your room can’t accommodate the venting path, or when you’d be happier with an electric unit that requires no gas line and no chimney work. We’ll tell you that on the site visit — we don’t push units that aren’t a fit.

Installation Considerations in DFW

In DFW, installing a Mendota Outdoor DXV35 Outdoor touches city building permits, gas-line work (if conversion), framing modifications, and inspection signoff. None of that is exotic — but every step has a way to go wrong, which is why we sequence it carefully.

What we typically deal with:

• **Venting path** — coaxial direct-vent runs need to clear bird-safe terminations, exterior-wall offsets, and 8-ft minimum from grade or operable openings (per IFGC 503.8)
• **Gas line** — sized to the unit’s BTU input, with appropriate sediment trap and shutoff at the appliance (Texas plumbing code)
• **Framing** — clearances per the manufacturer’s manual, with header sizing for the chase opening
• **Permits** — most DFW cities require a gas / mechanical permit for a new fireplace install; we pull those, not you
• **Inspection** — final inspection by city building department, with manometer pressure test on the gas line

Older homes — particularly Park Cities, Fort Worth historic districts, and some Lakewood properties — sometimes hide structural surprises (failed headers, hidden chimney chases, asbestos around old flues). When we find one of those, we stop and have a conversation before charging forward.

How the DXV35 Outdoor Compares to Similar Models

Within the Mendota Outdoor lineup, the DXV35 Outdoor sits alongside several alternatives. It tends to be the right pick when you want the brand prestige and the architectural look but don’t need the absolute largest unit — there are bigger and more expensive units, but most homes never need them.

Compared to other brands at this tier, the DXV35 Outdoor competes head-on with premium architectural fireplaces from European and high-end North American manufacturers — Stuv, Ortal, and others. The differences come down to:

• **Build quality and finish detail** — visible in the firebox, the glass frame, and the trim
• **Burner aesthetics** — flame pattern, ember-bed realism, log set quality
• **Control electronics** — basic millivolt vs. IPI vs. smart-home-integrated
• **Service network depth** — how fast can we get a replacement IPI module, fan motor, or glass panel

For most homeowners, the DXV35 Outdoor hits the right balance. If you’re choosing between this and another model and not sure which way to lean, that’s exactly the kind of conversation we have on a site visit.

Real-World Install Context

In DFW, we’ve installed the DXV35 Outdoor in luxury custom builds in Westlake, Southlake, and University Park, where the fireplace is centered in a great room with floor-to-ceiling stone or plaster surrounds. Common scenarios:

• **New custom build** — coordinated with builder framing, single-pass install, surround built around it after
• **Remodel / replacement** — old prefab gets removed, chase reframed if needed, new DXV35 Outdoor dropped in, surround rebuilt
• **Conversion** — old wood-burning masonry fireplace, gas line run, insert recommended instead — this model is for new framed openings, not retrofits

We always document the install with photos at each stage, deliver the manual to the homeowner, and walk through the operation before we leave.

Pricing Context

We don’t publish fixed prices for the Mendota Outdoor DXV35 Outdoor on this page, and there’s a reason: the unit price is only one line on the quote. The total project cost depends on whether we’re running a new gas line, framing a new chase, building a custom surround, integrating a smart-home control, and what your city’s permit fees look like.

For ballpark planning, premium-tier installations of architectural fireplaces typically land in the upper-five-figure range when you include surround and finishing work. Mid-market gas fireplace installs are typically a fraction of that. Wood-burning installs vary widely depending on chimney work.

The accurate number for *your* project comes from a site visit. Call 214-444-8094 and we’ll schedule one. Quotes are written, itemized, and good for 30 days.

FAQ — Mendota Outdoor DXV35 Outdoor

A: Once permits are pulled and materials staged, a typical install takes 2–4 days for a standard chase, longer if we’re framing new or rebuilding a surround. We give you a calendar at quote time, not after.

A: It depends on the room — square footage, ceiling height, insulation, and exposure all matter. The 35,000 BTU/hr output is plenty for a typical great room, but we’ll model your specific room before we promise anything.

A: Yes — most Mendota Outdoor units offer IPI ignition, optional remote, and integration paths to Lutron, Crestron, and similar systems. We wire it during install.

A: Mendota Outdoor warranties vary by component — typically lifetime on the firebox, multi-year on burners and electronics, shorter on glass and aesthetic parts. We register your warranty at install and keep a copy on file.

A: Annual inspection and tune-up. We sweep, check seals, verify pilot/IPI operation, clean the glass, vacuum the burner pan, and confirm gas pressures. Skipping years voids the warranty and shortens the unit’s life.

Ready to Install a Mendota Outdoor DXV35 Outdoor?

If the Mendota Outdoor DXV35 Outdoor sounds like a fit, the next step is a site visit. We’ll measure, walk through your venting options, talk surround design, and write a fixed quote.

— *Yuval Ben-Rashi, Owner — Texas Service Experts*

Internal Links

• [Equipment & Brand Library](https://texasserviceexperts.com/equipment/)
• [Fireplace Installation in DFW](https://texasserviceexperts.com/services/fireplace-installation/)
• [Brand Comparison Guide](https://texasserviceexperts.com/compare/)
• [Service Areas We Cover](https://texasserviceexperts.com/service-areas/)
• [Schedule a Free Site Visit](https://texasserviceexperts.com/contact/)

JSON-LD Schema

“`json

{

“@context”: “https://schema.org”,

“@graph”: [

{

“@type”: “Product”,

“name”: “Mendota Outdoor DXV35 Outdoor”,

“brand”: {

“@type”: “Brand”,

“name”: “Mendota Outdoor”

},

“description”: “premium outdoor gas fireplace fireplace, Mendota outdoor patio fireplace”,

“category”: “Fireplace”,

“url”: “https://texasserviceexperts.com/equipment/mendota-outdoor-dxv35-outdoor/”

},

{

“@type”: “Service”,

“name”: “Mendota Outdoor DXV35 Outdoor Installation”,

“provider”: {

“@type”: “LocalBusiness”,

“name”: “Yuval Ben-Rashi”,

“telephone”: “☎ 214-444-8094”

},

“areaServed”: “Dallas-Fort Worth, TX”,

“description”: “Professional installation, conversion, and service for the Mendota Outdoor DXV35 Outdoor.”

},

{

“@type”: “FAQPage”,

“mainEntity”: [

{

“@type”: “Question”,

“name”: “How long does a Mendota Outdoor DXV35 Outdoor install take?”,

“acceptedAnswer”: {

“@type”: “Answer”,

“text”: “2-4 days for a standard chase, longer for framing or surround work.”

}

},

{

“@type”: “Question”,

“name”: “Will the DXV35 Outdoor heat my whole room?”,

“acceptedAnswer”: {

“@type”: “Answer”,

“text”: “Depends on room size, ceiling, and insulation; we model the specific room before quoting.”

}

},

{

“@type”: “Question”,

“name”: “What’s the warranty on the DXV35 Outdoor?”,

“acceptedAnswer”: {

“@type”: “Answer”,

“text”: “Mendota Outdoor offers component-specific warranties \u2014 typically lifetime firebox, multi-year electronics.”

}

}

]

},

{

“@type”: “BreadcrumbList”,

“itemListElement”: [

{

“@type”: “ListItem”,

“position”: 1,

“name”: “Home”,

“item”: “https://texasserviceexperts.com/”

},

{

“@type”: “ListItem”,

“position”: 2,

“name”: “Equipment”,

“item”: “https://texasserviceexperts.com/equipment/”

},

{

“@type”: “ListItem”,

“position”: 3,

“name”: “Mendota Outdoor DXV35 Outdoor”,

“item”: “https://texasserviceexperts.com/equipment/mendota-outdoor-dxv35-outdoor/”

}

]

}

]

}

“`